banner fade v2

Dross-Free Conventional Plasma Cutting!

Can you handle increasing production time? ez Router conventional CNC plasma cutting options rock!

Adding the Auto-Cut O2 series systems to any ez Router CNC plasma machine offers you virtually dross-free cuts and excellent high-speed oxygen cutting. Thermal Dynamics has also used MaximumLife consumable parts in the design of this plasma cutting system. Rest assured that the Auto-Cut CNC plasma cutters offer your business the best parts life in their class.

With the addition of Auto-Cut to your plasma CNC you'll have economic performance on mild steel and non-ferrous materials. The power supplies are designed for low cost operation you can always rely on. Thanks to features like TD's XT-301 consumable parts cartridge and machine status message center the Auto-Cut systems are easy to operate.




Auto-Cut 300 vs Oxyfuel

  • Averages 3 times faster cut speeds
  • Pierces 1¼" (35mm) in 1 second
  • One Auto-Cut 3002 can replace up to 3 oxy-fuel torches - each requiring their own height controls.
  • Patented consumable technology




Matching Cutter and Application

As with any other task, the easiest approach that yields the best results is to match the tool to the project. The same wisdom will get you further faster when you make sure your plasma CNC cutting system choice is not going to hamper production speed, limit your capabilities or stand in your way of business growth.

Which Auto-Cut model will it take to get the job done fast and easy for more profitability? Make it a good fit. The tomorrow's business health could very well depends on it!


Excellent Cutting Capacity

Improve your production time and capabilities of conventional cutting of mild steel and non-ferrous materials. The job could be a whole lot easier, faster and quality of cut is much improved too with Thermal Dynamics Auto-Cut 30O2 CNC plasma system as an upgrade option on any one of ez Router's plasma machines.

You'll have maximum plasma cutting capacity for conventional O2/Air cutting on mild steel with unbeatable parts life and quality of cut. It offers edge start capabilities of up to 3" (75mm) on mild steel. Increased speed, quality and reliability to keep your productivity smooth and at a profit.

  • Production Cut: 1 1/2" (40mm)
  • Maximum Cut: 1 3/4" (45mm)



XT-301 Torch Technology

The unique Consumables Cartridge houses consumable parts only, no built-in head/torch body to drive replacement costs up. Changing a cartridge is fast and easy – a couple of twists and the unique ‘rapid engagement’ retaining collar threads release the cartridge. Down-time is reduced to minutes and you can change from one process to another or from one application to another quickly and easily.


A close-up view of the easy to change CNC plasma cutting torch on our Auto-Cut CNC plasma cutting upgrades.

No Tools Needed! Could it be any faster or easier? No tools required for changing consumables or any major components in the torch head.

Superior Warranty: The XT-301 warranty covers components and service for a full year.

No Leaks Head: Designed so you have no coolant drips from the torch head when the consumables cartridge is removed. This also stops air from entering the system and getting trapped in leads.

Quality Cuts on All Metals: The dual gas technology on the XT-301 torch gives a high arc density plasma cutting stream on mild steel, stainless steel, aluminum and other non-ferrous materials. Choices for plasma gas include O2, N2, Ar-H2, or Air.

SpeedLok Collar: Gives you rapid engagement, cutting down time for consumables changes.

Self-Centering Components: Precise engineering of consumable parts and torch body designed so they lock into place for absolute alignment, and remain perfectly positioned cut after cut. Independently-aligned tip and electrode for reliable, accurate re-centering of the consumable cartridge after each parts change.

Relaxed Cutting Perameters: The operating window of the XT-301 permits a +/- 30% travel speed variance. Meaning that you'll get great cuts more often, reducing waste on time and materials time.

  • Less critical standoff height
  • Wider ‘Operating Window’ for dross-free cutting



More Auto-Cut Advantages:

 

Other Auto-Cut Models

CNC Plasma Cutting Speeds

Specifications used in lab and field trials to gather chart data:

  • Thermal Dynamics Torch: Model XT-301
  • Production Piercing / Cutting Capacity: 1 1/2" (40mm) - Mild Steel
  • Maximum Piercing / Cutting Capacity: 1 3/4" (40mm) - Mild Steel
  • Maximum Edge Start (Mild Steel) 3" (75mm)

* The cutting speed chart above includes preliminary data and is subject to change without notice, compare other data carefully. The above stated speeds are the best cut speeds, as is the case with all Thermal Dynamics competitors' cutting speed numbers. Much higher cutting speeds are possible, though edge quality and bevel angle may be compromised. The capabilities shown in this chart were obtained by using new consumables, correct gas and current settings, accurate torch height control and with the torch perpendicular to the workpiece. The operating chart does not list all processes available for the Auto- Cut 100.



Incredible Mileage from Consumables




Still Have Questions?

Call (855) EZ-ROUTER (397-6883) - we have the answers.

Superior Cut and Performance

You'll find the Ultra-Cut 100 plasma cutting system ideal for robotic CNC applications. For high end production, this is your answer. Best in its class, the Thermal Dynamics Ultra-Cut 100 can be added as an upgrade on any one of ez Router's CNC machines.

There are many advantages for the shop or business whose applications and quality standards match the capabiities of the Ultra-Cut 100. Easy to use, loaded with advanced technology and a reliable system for premium precision of cut, increase productivity and profitability.

  • Production Cut: 1/2" (15mm)
  • Maximum Cut: 3/4" (20mm)



XT-300 Torch Technology

The most advanced torch technology on the market today! XT Technology is patented and available only on Thermal Dynamics CNC plasma cutting systems. The unique Consumables Cartridge houses consumable parts only, no built-in head/torch body to drive replacement costs up. Changing a cartridge is fast and easy – a couple of twists and the unique ‘rapid engagement’ retaining collar threads release the cartridge. Down-time is reduced to minutes and you can change from one process to another or from one application to another quickly and easily.


A close-up view of the easy to change CNC plasma cutting torch on our Auto-Cut CNC plasma cutting upgrades.

No Tools Needed! Could it be any faster or easier? No tools required for changing consumables or any major components in the torch head.

Superior Warranty: The XT-301 warranty covers components and service for a full year.

No Leaks Head: Designed so you have no coolant drips from the torch head when the consumables cartridge is removed. This also stops air from entering the system and getting trapped in leads.

No Leaks Head: Designed so you have no coolant drips from the torch head when the consumables cartridge is removed. This also stops air from entering the system and getting trapped in leads.

Quality Cuts on All Metals: The dual gas technology on the XT-301 torch gives a high arc density plasma cutting stream on mild steel, stainless steel, aluminum and other non-ferrous materials.

Marking Gas: Chose from plasma gases including O2, N2, Ar-H2, and Ar for marking.

Shield Gas: Pick your preference from O2, N2, H20, and Air.

SpeedLok Collar: Gives you rapid engagement, cutting down time for consumables changes.

Self-Centering Components: Precise engineering of consumable parts and torch body designed so they lock into place for absolute alignment, and remain perfectly positioned cut after cut. Independently-aligned tip and electrode for reliable, accurate re-centering of the consumable cartridge after each parts change.

Dross-Free Cutting: Precision cutting at it's finest, reducing waste on time and materials time.




More Ultra-Cut Information

 

More Ultra-Cut Models:

CNC Plasma Cutting Speeds

Specifications used in lab and field trials to gather chart data:

  • Thermal Dynamics Torch: Model XT-300
  • Production Piercing / Cutting Capacity: 1/2" (12mm) - Mild Steel
  • Maximum Piercing / Cutting Capacity: 5/8" (15mm) - Mild Steel
  • Maximum Edge Start: 3/4" (20mm) - Mild Steel

High end precision for conventional plasma cutting CNC machines.

* The cutting speed chart above includes preliminary data and is subject to change without notice, compare other data carefully. The above stated speeds are the best cut speeds, as is the case with all Thermal Dynamics competitors' cutting speed numbers. Much higher cutting speeds are possible, though edge quality and bevel angle may be compromised. The capabilities shown in this chart were obtained by using new consumables, correct gas and current settings, accurate torch height control and with the torch perpendicular to the workpiece. The operating chart does not list all processes available for the Ultra- Cut 100.



Incredible Mileage from Consumables


Advanced technology saves you time and money with XtremeLife consumables on CNC plasma cutters.

Still Have Questions?

Call (855) EZ-ROUTER (397-6883) - we have the answers.